|
(AT) Motherboard Power
P8
|
Pin
|
Name
|
|
Color
|
Description
|
| 1 |
PG |
|
Orange |
Power Good, +5 VDC when
all voltages has stabilized. |
| 2 |
+5V |
|
Red |
+5 VDC (or n/c) |
| 3 |
+12V |
|
Yellow |
+12 VDC |
| 4 |
-12V |
|
Blue |
-12 VDC |
| 5 |
GND |
|
Black |
Ground |
| 6 |
GND |
|
Black |
Ground |
P9
|
Pin
|
Name
|
|
Color
|
Description
|
| 1 |
GND |
|
Black |
Ground |
| 2 |
GND |
|
Black |
Ground |
| 3 |
-5V |
|
White or Yellow |
-5 VDC |
| 4 |
+5V |
|
Red |
+5 VDC |
| 5 |
+5V |
|
Red |
+5 VDC |
| 6 |
+5V |
|
Red |
+5 VDC |
(ATX) Motherboard Power
| Pin |
Signal |
18 AWG Wire |
| 11
11
|
+3.3 VDC +/-4%
3.3V sense +/-4%
|
Orange(22AWG)
Brown(22AWG)
|
| 12 |
-12V DC +/-12% |
Blue |
| 13 |
COM |
Black |
| 14 |
PS-ON |
Green |
| 15 |
COM |
Black |
| 16 |
COM |
Black |
| 17 |
COM |
Black |
| 18 |
-5V DC +/-5% |
White |
| 19 |
+5V DC +/-5% |
Red |
| 20 |
+5V DC +/-5% |
Red |
| Pin |
Signal |
18 AWG Wire |
| 1 |
+3.3V +/-4% |
Orange |
| 2 |
+3.3V DC +/-4% |
Orange |
| 3 |
COM |
Black |
| 4 |
+5V DC +/- 5% |
Red |
| 5 |
COM |
Black |
| 6 |
+5V DC +/- 5% |
Red |
| 7 |
COM |
Black |
| 8 |
PW-OK |
Gray |
| 9 |
+5V SB +/- 5% |
Purple |
| 10 |
+12V DC +/-5% |
Yellow |
PS-ON PS-ON is an active low signal (Green-Pin
14) that turns on all of the main power rails. When this signal is held
high or open circuit by the motherboard, the power rail outputs should
not deliver current and should be at ground potential. Power should be
delivered only if PS-ON is held at ground.
5V SB 5V SB is a standby voltage (Purple-Pin 9) that may be
used to power circuits during power down state. Eg. Soft power control.
PW-OK PW-OK is a power good signal (Gray-Pin 8) and should
be held high by the power supply to indicate that the +5Vdc and +3.3Vdc
outputs are above the undervoltage thresholds of the power supply.
Any
information used is at your own risk.
Do take proper precautions when working with electronic parts,
some can hold electrical discharges
All
rights reserved 1999
|